NG CASTORE XL iQ
Membrane Nitrogen generator with integrated direct drive Scroll compressor. Intelligent Quiet Technology
The NitroGen series NG CASTORE XL iQ use Membrane technology.
They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%.
This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.
The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor. Continuous control of the operating parameters of Nitrogen allows to maintain the system at its maximum efficiency.
The CASTORE XL iQ has been developed to meet specific requirements in term of gas, flow, purity and pressure in LC-MS applications. It can be used for the evaporation of solvents in samples being analysed.
Product features
- Compatible with all LCMS
- 200 cc/min UHP Nitrogen for collision cell
- Low noise
- Low maintenance
- No belts
- Direct drive
- Generates nitrogen on demand
- Exclusive electronic flow control
- Ultra silent technology: 50 dB(A)
- Reliable – No vibrations
- Designed to run 24 hours a day
Main applications
- LCMS
- Solvent evaporation
- MP AES
Technical specifications
FULL RANGE models (115-240 Vac)
| Models: NG CASTORE XL iQ | 20 | 40 | 70 |
| 6920.70.20.1 | 6920.70.40.1 | 6920.70.70.1 | |
| N2 outlet | |||
| Flow rate (Max) | 20 l/min | 40 l/min | 70 l/min |
| Outlet pressure (Max) | 9 Bar | 8 Bar | |
| Nitrogen purity | LCMS grade (up to 99.9%*1) | ||
| Nitrogen for collision cell*2 | 200 cc/min @ 99.9999%*3 with option 6920.71.90 | ||
| Communication | |||
| LCD with touch screen | Standard | ||
| RS485 | Standard | ||
| RS232 | For service | ||
| General data | |||
| Power supply voltage (min-Max) | 115-240 Vac (±10%) 50/60 Hz | ||
| Connection type | IEC C20 | ||
| Rated power(Max) | 1.3 KW | 1.5 KW | 1.9 KW |
| Net weight | 185 kg | 185 kg | 185 kg |
| Noise level | < 45 dB | < 50 dB | |
| Heat value (BTU) | 4440 | 5130 | 6500 |
| Dimensions (W x D x H) | 59 x 92 x 73 cm | ||
| Connections | |||
| N2 outlet port | ¼” BSPP female | ||
| N2 UHP outlet port | ¼” BSPP female | ||
| Drain port | ¼” BSPP female | ||
| Operating/storage conditions | |||
| Temperature | 5-35°C (41-95°F) | ||
| Humidity (max, non condensing) | 80% [5-35°C (41-95°F)] | ||
| IP rating | IP20 | ||
| Pollution degree rating | 2 (with no aromatic compounds) | ||
*1 The purity refers to the residual oxygen, depends on flow and working pressure
*2 Optional, see below
*3 The purity refers to the residual oxygen
Specifications, 220-240 Vac models
| Models: NG CASTORE XL iQ | 20 | 40 | 70 |
| 6920.70.20 | 6920.70.40 | 6920.70.70 | |
| N2 outlet | |||
| Flow rate (Max) | 20 l/min | 40 l/min | 70 l/min |
| Outlet pressure (Max) | 9 Bar | 8 Bar | |
| Nitrogen purity | LCMS grade (up to 99.9%*1) | ||
| Nitrogen for collision cell*2 | 200 cc/min @ 99.9999%*3 with option 6920.71.90 | ||
| Communication | |||
| LCD with touch screen | Standard | ||
| RS485 | Standard | ||
| RS232 | For service | ||
| General data | |||
| Power supply voltage (min-Max) | 220-240 Vac (±10%) 50/60 Hz | ||
| Connection type | IEC C20 | ||
| Rated power(Max) | 1.4 KW | 1.8 KW | 2.2 KW |
| Net weight | 175 kg | 175 kg | 175 kg |
| Noise level | < 45 dB | < 50 dB | |
| Heat value (BTU) | 4800 | 6150 | 7510 |
| Dimensions (W x D x H) | 59 x 92 x 73 cm | ||
| Connections | |||
| N2 outlet port | ¼” BSPP female | ||
| N2 UHP outlet port | ¼” BSPP female | ||
| Drain port | ¼” BSPP female | ||
| Operating/storage conditions | |||
| Temperature | 5-35°C (41-95°F) | ||
| Humidity (max, non condensing) | 80% [5-35°C (41-95°F)] | ||
| IP rating | IP20 | ||
| Pollution degree rating | 2 (with no aromatic compounds) | ||
*1 The purity refers to the residual oxygen, depends on flow and working pressure
*2 Optional, see below
*3 The purity refers to the residual oxygen
Discover also…
LNI offers a wide range of laboratory benches for LC, LC-MS systems. Completely modular and customizable according to the specific application, our lab work benches can be combined to configure complete laboratory workstations. They are designed for all OEM instruments (Agilent, Shimadzu, Sciex, Thermo, Bruker, Perkin Elmer, Waters) as well as for our premium LNI gas generators.
Information request
Need more information about this product?
Please contact us at info@lni-swissgas.eu or fill the form.