KZA FID AIR V2
Zero Air generator
The AirGen series KZA FID AIR V2 is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the KZA FID AIR V2 can purify up to 3 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.
The KZA FID AIR V2 has a very simple and efficient interface. It can also be managed by the Hydrogen series KUBE is ideal to supply Hydrocarbon free Air to FID detectors.
Product features
- Easy use and quick installation
- High flow rate up to 3.0 L/min
- Pressure up to 7.0 bar (101 psi)
- RS 485 as standard
- Purity: < 0.05 ppm THC
- No maintenance
- Reduced foot print
- Stackable with HG KUBE V2
Main applications
- GC-FID
- GC-NPD
- GC-FPD
- GC-PFPD
- THA
- Gas sensing
Technical specifications
| Models: KZA FID AIR V2 | 1.5 | 3.0 |
| Zero Air outlet | ||
| Flow rate (Max) | 1.5 l/min | 3.0 l/min |
| Outlet pressure (min) | Inlet pressure – 0.5 bar (8 psi) @ maximum flow | |
| Outlet pressure (Max) | 7.0 bar (101 psi) | |
| Total hydrocarbon content | < 0.05ppm | |
| Air inlet | ||
| Air Inlet requirement | ISO 8573-1:2010 Class [2:4:1] | |
| Max inlet hydrocarbon content | 100ppm | |
| Min supply pressure | 3 bar (43psi) | |
| Max supply pressure | 10 bar (145 psi) | |
| Temperature (min; Max) | 1°C (34°F); 35°C (95°F) | |
| Communication | ||
| RS485 | Standard | |
| General data | ||
| Supply voltage | 100-240Vac (±10%) 50/60Hz | |
| Connection type | IEC320-C14 | |
| Nominal power (Max) | 320 W | |
| Fuse rating (5x20mm) | 4A (250VAC – T) | |
| Dimensions (W x D x H) | 26 x 40 x 15 cm | |
| Net weight | < 10 kg | |
| Connections | ||
| Outlet port | 1/8″ female BSPP | |
| Inlet port | 1/8″ female BSPP | |
| Water purge | Threaded ISO M5 female | |
| Operating conditions | ||
| Storage temperature | 1-40°C (33.8-104°F) | |
| Operating temperature | 5-35°C (41-95°F) | |
| Humidity (max, non condensing) | 80.00% [5-35°C (41-95°F)] | |
| Noise | < 35dB(A) | |
| IP rating | IP20 | |
Discover also…
LNI offers hydrogen sensors, demineralizators and a wide range of benches. Completely modular and customizable according to the specific application, our benches can be combined to configure complete workstations.
Information request
Need more information about this product?
Please contact us at info@lni-swissgas.eu or fill the form.