NG POLLUCE
PSA Nitrogen generator for LCMS
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and phthalates-free.
The generator could be equipped with a built-in oil less compressor with inverter technology. Inverter electronically control the electrical voltage, current and frequency of the compressor motor. It receives information from sensors monitoring operating conditions, and adjust the revolution speed of the compressor, which directly regulates air pressure output.
Optimum control of operation frequency results in eliminating the consumption of excessive electricity and providing the most comfortable conditions to increase the compressor life-time. Thanks to the CPU with touch screen display, the continuous monitoring of operational status is guaranteed.
Productos Destacados
- PSA Technology
- Easy use and installation (plug and play)
- Low noise
- Generates nitrogen on demand with exclusive electronic flow control
- Low energy exclusive compressor inverter controlled
- Designed to run 24 hours a day
- Pressure up to 8 bar
- CH4 oven scrubber (option)
Principales Aplicaciones
- LCMS
- Solvent evaporation
Especificaciones Ténicas
| Models: NG POLLUCE | 40 | 40C |
| N2 Outlet | ||
| Flow rate (Max) | 40 l/min | 40 l/min |
| Outlet pressure (Max) | Air Inlet pressure – 2 bar | Up to 8 bars |
| Nitrogen purity | Up to 99% | |
| Outlet Dew-point | <-50°C | |
| Outlet particulate | 0.01 micron | |
| Air inlet | ||
| Air inlet requirement | Particulate: < 1 micron | – |
| Dewpoint: < -20°C (-4°F) | – | |
| Oil: <0.01 mg/m³ | – | |
| Flow rate (max) | 100 L/min | – |
| Supply pressure (min – max) | 7 bars (95 psi) – 10 bars (145 psi) | – |
| Recommended temperature | < 30°C (86°F) | – |
| Communication | ||
| LCD with touch-screen | Standard | |
| RS485 | Standard | |
| RS232 | Standard | |
| USB | Standard | |
| Digital I/O | Standard | |
| General data | ||
| Supply rating | 100-240Vac 50/60Hz | Single phase 220-240Vac 50/60Hz |
| Connection type | IEC320-C13 | Cable, 3 x 2.5 mm² |
| Installation power (max) | 280W | 2.2KW |
| Fuse rating (5x20mm) | 4A – 250VAC | – |
| Net weight | < 160 kg | < 300 Kg |
| Dimensions (W x D x H) | 42 x 40 x 160 cm | 42 x 90 x 160 cm |
| Connections | ||
| Outlet port | 1/4” female BSPP | |
| Inlet port | 1/4” female BSPP | – |
| Drain port | Quick fitting for tube 8mm | 1/4” female BSPP |
| Operating/storage conditions | ||
| Working Temperature | 5-40°C (41-104°F) | |
| Storage Temperature | 1-50°C (34-122°F) | |
| Humidity (Max, non condensing) | 70% | |
| Noise | <25 dB(A) | <65 dB(A) |
| IP rating | IP20 | |
| Pollution degree rating | 2 (with no aromatic compounds) | |
| Altitude (Max) | < 2000 m | |
Solicitar información
Need more information about this product?
Please contact us at info@lni-swissgas.eu or fill the form.